Hutchison

HOME

Applications

Power press

Stamping, cutting, moulding presses vibrate and leads to a noxiousness for human and machines into their working conditions. Thus an efficient isolation from impacts and vibrations should be considered.

Elastomer Mounts:

“Sandwich” Mounts

Very high axial loads; The suspended equipment is free to move in all directions; High resistance to atmospheric exposure.

Stabiflex

Easy movement of suspended machinery; Cup to protect the rubber and distribute the load; Simple to fit.

Nivofix®

The Nivofix® mount is an adjustable equipment foot comprising a circular disc bonded to a protected elastomer base. Absorbs high frequency vibrations; Corrosion resistant; Anti-slip sole.

S.C.P Mount

Anti-vibration mount for stationary equipment with protective cover.

Metal Mountings:

VIBSOL®

The VIBSOL® mount is made of a round metal cushion covered with anti-slip elastomer pad on both side. High and low temperature with good resistance to fatigue; It offers good stability for the suspended machine; Constant natural frequency over a wide load range.

V43/V44/V45/V46

The range can be used for mounting machine tools in harsh industrial environments, and can be used for mounting forming tools (pressed, shears, folding machines) and improves the vibration isolation level.

V47/V47D/V47T/V47Q

This machinery mount, with adjustable height, is used for machine tools and other rotation machine. The system available with a constant natural frequency over a wide load range; Conical wire mesh cushion, capable of lateral loads.

PDM-1000-01/PDM-2000-01

Low profile mounts are high static and dynamic load range. Mainly for presses and machine tools without the need to fix or grout in position.

SP539-882/SP539-883/SP539-887/SP539-888

This mount ensures good stability of the suspended equipment. The system is very suitable for rotating machines. All metal mount comprising a stack of between two and three woven steel, this make higher levels of isolation.

V118-MG V118-DG/V318 V318-D

The isometric stiffness characteristics and anti-rebound metal cushions of these suspensions makes them suitable for suspending engines on ships, vehicle etc.

V120/V120-D/V125/V125-D

Series of all metal low profile mounts with one or two cushions, working in compression only, permitting high dynamic overloads. Mounts can be fixed on floor. These mounts are designed for presses, machine tools, transformers and diesel engines.

V402-MG

The 402-MG damper has a cast iron upper cover and mounting plate and a high strength aluminum alloy shaft. It can be used to suspend fixed or on board machine tools and rotating machines (pumps, engines, generator sets rotating at speeds over 2500rpm).

V1B1114 / V1B1115 / V1B1116 / V1B1134 / V1B1135 / V1B1136

This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.

SP550W/551W/552W/553W/SP560W/561W/562W/563W