Pipes

Fluid movement into the pipes vibrates.

Then the vibrations go from the pipes through the load-bearing because of the rigid fixing points. Hanging or antivibration mounts are required to avoid this issue.

Elastomer Mounts: 
Traxiflex®
The Traxifle® hanger comprises two metallic U armatures joined by two bounded rubber blocks. High resistance to atmospheric exposure; Very economic; Several fixing methods.
Strafix
Pipe insulation, marine applications; high stiffness; cutting and shaping to suit the pipe is easy.
Metal Mountings: 
METALLIC CUSHIONS
Hutchinson have a range of all steel mounting whose essential element is the « steel cushion » made from woven stainless steel wire and compressed. Steel mountings have considerable mechanical strength as well as high damping characteristics in the order of 10 to 20%, depending on the application. Unaffected by corrosion. Steel mountings are unaffected by oil, grease, solvents, weather conditions and corrosive products. Unaffected by temperature. Steel mountings withstand temperature from -70°C to +300°C without any changes of the characteristics. Low natural frequency: Steel mountings with springs can have natural frequencies as low as 3 Hz, which can provide up to 80% attenuation for low speed rotating machineries.
V1786-A06/V1700-A06/V1700-B06
This suspension system consists of rectangular cushions made of woven compressed stainless steel. The system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings.
Metallic Cushions
Standard or custom metallic cushions can be used for many industrial applications. They are naturally resistant grease, oil, water, dust, etc; Extension temperature range from -70℃ to +300℃; Stabilized with a long service life. High damping ratio.
V118-MG V118-DG/V318 V318-D
The isometric stiffness characteristics and anti-rebound metal cushions of these suspensions makes them suitable for suspending engines on ships, vehicle etc.
V402-MG
The 402-MG damper has a cast iron upper cover and mounting plate and a high strength aluminum alloy shaft. It can be used to suspend fixed or on board machine tools and rotating machines (pumps, engines, generator sets rotating at speeds over 2500rpm).
V1H751/V1H752
The V1H751 and 752 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The system is possible to use them for mounting on board equipment in ships, rail, road transport, civil engineering plant or fixed machined that have to be floor mounted.
V1H-6000/V1H-6100
V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.
NEWS
Elastomer Mounts
Metal Mountings
Flexible Bushes
Acoustic Foams
Flexible Couplings
Dynamic sealings

CONTACT

Cookies