Slabs and floating floors

The antivibration mountings produced by Paulstra for the slab and suspended floors improve the comfort of the persons living in the building and isolate noise and vibrations coming from miscellanour equipment.

Elastomer Mounts: 
Radiaflex®
Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.
Paulstradyn®
Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.
Supports and bump stops
Wide loading ranges, for wide applications.
Metal Mountings: 
V1B1114 / V1B1115 / V1B1116 / V1B1134 / V1B1135 / V1B1136
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
VIBCABLE
The range of mounts has a stainless steel cable wound between light alloy bars. These dampers can absorb accelerations to equipment subjected to shock and drop. Mainly for protecting of equipment in containers, racks and any fragile on board equipment.
MV801/MV803
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
NEWS
Elastomer Mounts
Metal Mountings
Flexible Bushes
Acoustic Foams
Flexible Couplings
Dynamic sealings

CONTACT

Cookies