Hutchison

HOME

Applications

Genset

Onboard or not, gensets are an important source of noise and vibrations. Paulstra propose a range of products to improve the comfort of the users, to reduce the components wear and to protect the equipment around.

Elastomer Mounts:

Radiaflex®

Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.

Paulstradyn®

Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.

Paulstrafloat®

The machine may be placed with its mounts directly on the ground; Quick installation; Rubber protected against harmful liquids; Very suitable for mobile equipment.

Evidgom®

A very high axial elasticity; Progressive buffer against shocks or accidental overload.

“Sandwich” Mounts

Very high axial loads; The suspended equipment is free to move in all directions; High resistance to atmospheric exposure.

Stabiflex

Easy movement of suspended machinery; Cup to protect the rubber and distribute the load; Simple to fit.

S.C Mount

Axial elasticity four times higher than radial elasticity; Can be used as a fail-safe assembly when fitted as in shape 1; Extensive range.

S.C.P Mount

Anti-vibration mount for stationary equipment with protective cover.

VIB HD 56

Anti-vibration and shock mount for navy, high loads, medium deflection, low frequency.

Beca

TheBeca mount with protective cap, small footprint. Very slim; Speed of fixing; Simple removal of the assembly; Extensive loading range.

VIB LD 03

Navy shock proof and vibration mount with double mounting level.

Metal Mountings:

V1H751/V1H752

The V1H751 and 752 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The system is possible to use them for mounting on board equipment in ships, rail, road transport, civil engineering plant or fixed machined that have to be floor mounted.

V1H-6000/V1H-6100

V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.

V1B1114 / V1B1115 / V1B1116 / V1B1134 / V1B1135 / V1B1136

This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.

MV801/MV803

MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.

Acoustic Foams:

Acoustic and thermic silicone foamPaulstra