Control and measuring machines

Whether for the pressure, the temperature, the flatness, the surface conditions, on-board or not, the control and measuring devices require an optimal accuracy. Active or passive, the Paulstra mountings are able to meet the higher requirements in terms of vibration isolation to ensure the accuracy of measurement and to increase the shelf-life of the equipment.

Elastomer Mounts: 
Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.
Anti-vibration and shock mount for navy. Heat resistant; Simple installation; Wide temperature range.
Anti-vibration and shock mount. Wide load range; Low frequency and multi-application.
GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core. High deflection under shocks; Long life; Low natural frequency; Low amplification at resonance.
Metal Mountings: 
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Cookies