Hoppers

A large, funnel-shaped device that serves as the entryway for stocking and distribute products. Hoppers are most of the time motorized that leads to a better movement of products. An accurate selection of the antivibration mount (AVM) will allow a good working condition of the machine meanwhile reducing the vibrations to the environment.

Elastomer Mounts: 
Radiaflex®
Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.
Paulstradyn®
Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.
Evidgom®
A very high axial elasticity; Progressive buffer against shocks or accidental overload.
Metal Mountings: 
V1B1114 / V1B1115 / V1B1116 / V1B1134 / V1B1135 / V1B1136
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Acoustic Foams: 
841000/841010
50 mm of corrugated PU Ether absorption foam. Self adhesive layer on one side. Temperature range: from - 25°C to +110°C.
841007
NBR-PVC based waterproof cellular rubber thickness 30mm(±3mm), Self adhesive layer on one side. Temperature range : ...
841003
NBR based waterproof cellular rubber, Thickness 33 mm. Self adhesive layer on one side. Temperature range static from
NEWS
Elastomer Mounts
Metal Mountings
Flexible Bushes
Acoustic Foams
Flexible Couplings
Dynamic sealings

CONTACT

Cookies