Hutchison

HOME

Applications

Electric Cupboards

The cupboard or the electric boxes are essential on every industrial or tertiary site. In outside or inside, they have to protect the sensitive electricity or computing networks, which they contain. In stainless steel, metal or in polyester, they must be isolated, in order to avoid the transmission of shock & vibrations into their components. Thus, their life expectancy is being increased while guaranteeing optimal functioning.

Paulstra has developed a range of specific products for the protection of these sensitive elements.

Elastomer Mounts:

Radiaflex®

Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.

Paulstradyn®

Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.

ISODYNE®

Small loads,for wide applications.

Minfix®

The minifix® mount comprises an elastomer pad with an anti-slip ridged surface and a threaded stud allow accurate height adjustment of equipment. Very simple and wide applications.

Beca

TheBeca mount with protective cap, small footprint. Very slim; Speed of fixing; Simple removal of the assembly; Extensive loading range.

Ardamp®

Anti-vibration support for high performance and high shock absorbance; Designed to protect fragile electronic equipment, control panels and measuring instruments.

Vibmar

Anti-vibration and shock mount for navy. Heat resistant; Simple installation; Wide temperature range.

VIB HD 45

Anti-vibration and shock mount. Wide load range; Low frequency and multi-application.

GB 530

GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core. High deflection under shocks; Long life; Low natural frequency; Low amplification at resonance.

Metal Mountings:

METALLIC CUSHIONS

Hutchinson have a range of all steel mounting whose essential element is the « steel cushion » made from woven stainless steel wire and compressed. Steel mountings have considerable mechanical strength as well as high damping characteristics in the order of 10 to 20%, depending on the application. Unaffected by corrosion. Steel mountings are unaffected by oil, grease, solvents, weather conditions and corrosive products. Unaffected by temperature. Steel mountings withstand temperature from -70°C to +300°C without any changes of the characteristics. Low natural frequency: Steel mountings with springs can have natural frequencies as low as 3 Hz, which can provide up to 80% attenuation for low speed rotating machineries.

Metallic Cushions

Standard or custom metallic cushions can be used for many industrial applications. They are naturally resistant grease, oil, water, dust, etc; Extension temperature range from -70℃ to +300℃; Stabilized with a long service life. High damping ratio.

V1H751/V1H752

The V1H751 and 752 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The system is possible to use them for mounting on board equipment in ships, rail, road transport, civil engineering plant or fixed machined that have to be floor mounted.

V1H-6000/V1H-6100

V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.

V1B1114 / V1B1115 / V1B1116 / V1B1134 / V1B1135 / V1B1136

This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.

VIBCABLE

The range of mounts has a stainless steel cable wound between light alloy bars. These dampers can absorb accelerations to equipment subjected to shock and drop. Mainly for protecting of equipment in containers, racks and any fragile on board equipment.

Acoustic Foams:

Acoustic and thermic silicone foamPaulstra