Onboard Equipment

Communication units, power groups, converters, hard drives, monitors, air conditioning, ... whether by sea, land or air, onboard devices require not only antivibration systems of high performance, but also shock and snatching protection.

Elastomer Mounts: 
Paulstrafloat®
The machine may be placed with its mounts directly on the ground; Quick installation; Rubber protected against harmful liquids; Very suitable for mobile equipment.
VIB HD 56
Anti-vibration and shock mount for navy, high loads, medium deflection, low frequency.
Ardamp®
Anti-vibration support for high performance and high shock absorbance; Designed to protect fragile electronic equipment, control panels and measuring instruments.
Vibmar
Anti-vibration and shock mount for navy. Heat resistant; Simple installation; Wide temperature range.
VIB HD 45
Anti-vibration and shock mount. Wide load range; Low frequency and multi-application.
E1E11S**AL*/E1E12S**AL*/E1E13S**AL*
VHDS elastomer able to carry loads under compression and traction. Flange, washer and shaft in 18/8 stainless steel;
S.L.F Mounts
Designed for off-road vehicles and cabs. Small loading and high deflection; High damped silicone; Zinc plated mild steel for improved fatigue strength.
E1E21/E1E22/E1E23
This mount designed to protect electronic equipment, navigation equipment; High damped material able to carry loads under compression and traction; Zinc plated mild steel for improved fatigue strength.
E1E31/E1E32
Shock and vibration mount in damped silicone for tension and compression use. Zinc plated mild steel for improved fatigue strength.
E1E41/E1E42/E1E43
VHDS elastomer able to carry loads under compression and traction. Zinc plated mild steel for improved fatigue strength.
GB 530
GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core. High deflection under shocks; Long life; Low natural frequency; Low amplification at resonance.
VIB LD 03
Navy shock proof and vibration mount with double mounting level.
Metal Mountings: 
V118-MG V118-DG/V318 V318-D
The isometric stiffness characteristics and anti-rebound metal cushions of these suspensions makes them suitable for suspending engines on ships, vehicle etc.
V402-MG
The 402-MG damper has a cast iron upper cover and mounting plate and a high strength aluminum alloy shaft. It can be used to suspend fixed or on board machine tools and rotating machines (pumps, engines, generator sets rotating at speeds over 2500rpm).
V1H-6000/V1H-6100
V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.
7002
The mental construction enable them to operate in the hardest of conditions. The mount can be used for mounting electronic or computer equipment, navigation equipment and on board measurement instruments.
VIBCABLE
The range of mounts has a stainless steel cable wound between light alloy bars. These dampers can absorb accelerations to equipment subjected to shock and drop. Mainly for protecting of equipment in containers, racks and any fragile on board equipment.
NEWS
Elastomer Mounts
Metal Mountings
Flexible Bushes
Acoustic Foams
Flexible Couplings
Dynamic sealings

CONTACT

Cookies