Elevators/Lifts

An elevator is a mobile equipment used for the vertical transportation of people or objects within a construction. The elevator is installed most of the time in a cage, generally inside the building where it generates solid vibrations due to their engine. To improve the comfort for the users and residents, Paulstra developed numerous solutions allowing the vibration isolations and the decreasing of sound levels.

Elastomer Mounts: 
Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.
Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.
A very high axial elasticity; Progressive buffer against shocks or accidental overload.
TheBeca mount with protective cap, small footprint. Very slim; Speed of fixing; Simple removal of the assembly; Extensive loading range.
Metal Mountings: 
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Acoustic Foams: 
Mass heavy silicone foam, density 500kg/m3, weight from 1.25 to 5kg/m².
50 mm of corrugated PU Ether absorption foam. Self adhesive layer on one side. Temperature range: from - 25°C to +110°C.
NBR-PVC based waterproof cellular rubber thickness 30mm(±3mm), Self adhesive layer on one side. Temperature range : ...
NBR based waterproof cellular rubber, Thickness 33 mm. Self adhesive layer on one side. Temperature range static from
Cookies