The dynamic forces (vibration and shocks) and the movements created to insure the operation of the machine, are majors sources of vibrations and of mechanical wear. Paulstra propose in its range products which are able to low the transmission of vibrations and to protect the metal frames without reducing the performances of the equipment.

Elastomer Mounts: 
Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.
A very high axial elasticity; Progressive buffer against shocks or accidental overload.
Metal Mountings: 
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Acoustic Foams: 
Mass heavy silicone foam, density 500kg/m3, weight from 1.25 to 5kg/m².
50 mm of corrugated PU Ether absorption foam. Self adhesive layer on one side. Temperature range: from - 25°C to +110°C.
NBR-PVC based waterproof cellular rubber thickness 30mm(±3mm), Self adhesive layer on one side. Temperature range : ...
NBR based waterproof cellular rubber, Thickness 33 mm. Self adhesive layer on one side. Temperature range static from
Dynamic sealings: 
Flexible Couplings